Vehicle Type: Refrigerator Truck
Number of Units: 1
Export Country: Costa Rica
Chassis Configuration: ISUZU 600P, 120hp engine, GVW 7000kg
Superstructure Configuration: 5m length of refrigerator box, Thermo King refrigeration unit RV-580.
Each board of the refrigerated box is a composite board structure, and the inner and outer cover boards and the core material are pressed into a sandwich composite board by the adhesive.
The assembling parts of the compartment panels are all designed with steps to increase the sealing length of the assembling section and improve the structural strength of the assembling parts. The joint surfaces of the compartment panels (including the rear door frame and the compartment panels) are coated with refrigerated box assembly glue to achieve reliability seal.
The screw connection is firm and reliable, and the outer screw holes of the compartment plate are coated with the compartment body assembly structure glue. The door frame and the refrigerated box are connected firmly and reliably, and the connecting screws are arranged neatly.
The air outlet of the machine cooling is generally at the top of the front section of the body compartment, if there is no ventilation slot:
1, Sometimes the cargo water can not be discharged, the bottom of the body will rot;
2, When the goods are full, the cold air of the cooler can only blow on the top of the goods, and the bottom of the compartment will gradually heat up, with ventilation slots. The air-cooling will blow to the rear door of the car body, and the air-cooling will follow it downwards, passing through the air duct, and the air-conditioning is in a circulating state;
3, If the cargo is loaded with a lot of hot air, the hot air in the incubator is difficult to evaporate. Use the ventilation slot to take away a lot of hot air.